| Wago Fieldbus
Coupler - ETHERNET Powerlink |
|
| Part
Number |
Conformity
Marking |
Approvals |
| 750-350 |
 |
cULus,
cULus-EX, |
| ETHERNET Powerlink
Fieldbus Coupler 100 Mbits/s; Digital & Analog Signals |
With ETHERNET Powerlink, a protocol is now
available that, on the one hand, is based on standard ETHERNET but on the
other, also meets the high requirements of determinism and cycle
time.
In addition, it has a flexible, fully developed application
interface and can thus rely on a wide range of available device and application
profiles.
The application interface of ETHERNET Powerlink is based on
the mechanisms defined in DS 301 CANopen communication profile specified by CAN
in Automation (or EN 50325-4).
Due to its characteristics, ETHERNET
Powerlink is suitable for applications with hard real-time
conditions.
However, it is also just as suitable for implementing
applications, which do not have such hard real-time conditions, yet must
guarantee transmission of large quantities of data within a defined period of
time and also require the well known CANopen flexibility. |
|
| Technical Information |
| Characteristic |
Value |
| No. of couplers connected to the Master |
limited by ETHERNET specification |
| Transmission medium |
Twisted Pair S-UTP 100 Ohm cat. 5 |
| Max. length of fieldbus segment |
100 m between hub station and 750-350; max.
length of network limited by ETHERNET specification |
| Baud rate |
100 Mbits/s |
| Buscoupler connection |
RJ-45 |
| Protocols |
ETHERNET Powerlink V2, ARP, HTTP, DNS, SNTP,
FTP |
| Max. no. of I/O modules |
64 |
| Max. no. of I/O modules with bus extension |
250 |
| Max.input process image |
1490 bytes |
| Max. output process image |
1490 bytes |
| No. of PDOs |
1 Tx / 2 Rx; 255 mapping entries per PDO (incl,
ctrl./status and diagnostics information) |
| Communication profile |
DS-301 (CANopen) |
| Device profile |
DS-401 |
| Configuration |
via PC or PLC |
| Cycle Time |
Powerlink >4 ms |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Max. input current (24 V) |
500 mA |
| Efficiency of the power supply |
87% |
|
| Characteristic |
Value |
| Internal current consumption (5V) |
300 mA |
| Total current for the I/O modules (5V) |
1700 mA |
| Isolation |
500V system/supply |
| Voltage via power jumper contacts |
DC 24V (-15%...+20%) |
| Current via power jumper contacts (max.) |
DC 10 A |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC CE-Immunity to interference |
acc. EN 50082-2 (1996) |
| EMC CE-Emission of interference |
acc. EN 61000-6-2 (1999) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Weight |
179.5 g |
| Color |
light gray |
| Height |
65 mm |
| Width |
50 mm |
| Length |
100 mm |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
|
|
