| Wago Fieldbus Coupler - PROFIBUS DP ECO 12 Mbaud |
 |
| Part Number |
Standard |
Conformity Marking |
Approvals |
 750-343 |
EN 50170 |
 |
cULus,
cULus-EX,
KEMA |
| PROFIBUS DP ECO FIELDBUS COUPLER 12 MBaud CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
The ECO fieldbus coupler is designed for applications with a reduced scale I/O requirement. Using digital only process data or small amounts of analogs, while retaining all of the choice that’s offered by the Series 750 I/O.
The coupler has an integrated supply terminal for the system voltage. The field power jumper contacts are supplied via a separate supply module.
When initializing, the buscoupler determines the module structure of the node, to create the process image in Profibus. In order to optimize addresses, the I/O modules with a bit width smaller than 8 are grouped in one byte.
It is furthermore possible to deactive I/O modules and to modify the image of the node according to the connected signals without having to modify the existing application.
The diagnosis concept is based on diagnostics according to the EN 50170 Standard. Therefore the programming of modules is not necessary to interpret the diagnostic information from each manufacturer. Note: GSD files required |
|
| Technical Information |
| Characteristic |
Value |
| Max. no. of nodes |
125 mit Repeater |
| Max. no. Of I/O points |
ca. 6000 (depends on Master) |
| Transmission medium |
Cu-cable acc. to EN 50170 |
| Max. length of fieldbus segment |
100 m ... 1200 m (depends on the baud rate / on the cable) |
| Baud rate |
9.6 kBaud ... 12 Mbaud |
| Transmission time |
typ. 1 ms (10 Modules; 32 E, 32 A/Mod;at 12 Mbaud and digital Signals)max. 3.3 ms |
| Buscoupler connection |
1 x D-SUB 9; socket |
| UL 508 |
E175199, UL 508 |
| Standard |
EN 50170 |
| Conformity marking |
CE |
| Max. no. of I/O modules |
63 |
| Max. fieldbus input image (Byte) |
32 Byte |
| Max. fieldbus output image (Byte) |
32 Byte |
| Configuration |
via PC or PLC |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current typ. at rated load (24 V) |
260 mA |
| Efficiency of the power supply |
80% |
| Internal current consumption |
350 mA |
| Total current for the I/O modules |
650 mA |
|
| Characteristic |
Value |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
acc. EN 50081-2 (94) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
1.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Weight |
115 g |
| Color |
light gray |
| Height |
65 mm |
| Height |
2.56 in |
| Width |
50 mm |
| Width |
1.969 in |
| Depth |
97 mm |
| Depth |
3.819 in |
| Strip length from |
5 mm |
| Strip length to |
6 mm |
| Strip length |
0.22 in |
| Weight |
115 g |
|
|
