| Wago Fieldbus Coupler - INTERBUS ECO 2 Mbaud |
 |
| Part Number |
Standard |
Conformity Marking |
Approvals |
 750-345 |
EN 50254 |
 |
cULus,
cULus-EX,
KEMA |
| INTERBUS ECO FIELDBUS COUPLER 2 MBaud CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
This buscoupler connects the WAGO-I/O-SYSTEM as a slave to the INTERBUS fieldbus.
The buscoupler automatically configures, creating a local process image which may include analog, digital or specialty modules. Analog and specialty data is sent via words abd/or bytes, digital data is sent bit by bit.
INTERBUS stores the process image in the corresponding Master control (PLC, PC or NC).
The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the INTERBUS fieldbus to the PLC, PC or NC for further processing, and received from the field via INTERBUS.
The data of the analog modules is stored in the process image which is created automatically according to the order in which the modules are connected to the buscoupler. The bits of the digital modules are sent byte by byte and added to the analog data. If the amount of digital information exceeds 8 bits, the buscoupler automatically starts with a new byte. |
|
| Technical Information |
| Characteristic |
Value |
| Max. no. of nodes |
256 |
| Max. no. Of I/O points |
4096 (depends on Master) |
| Transmission medium |
certified Cu cable |
| Max. length of fieldbus segment |
150 m |
| Data transmission rate (kBaud) |
2 kBaud |
| Transmission time |
on request |
| Buscoupler connection |
1 x D-SUB 9; plug for input interface 1 x D-SUB 9; socket for output interface |
| UL 508 |
E175199, UL 508 |
| Standard |
EN 50254 |
| Conformity marking |
CE |
| Max. no. of I/O modules |
64 |
| Max. fieldbus input image (Byte) |
20 Byte |
| Max. fieldbus output image (Byte) |
20 Byte |
| Configuration |
via PC or PLC |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current typ. at rated load (24 V) |
260 mA |
| Efficiency of the power supply |
80% |
| Internal current consumption |
350 mA |
| Total current for the I/O modules |
650 mA |
|
| Characteristic |
Value |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
acc. EN 50081-2 (94) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
1.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Weight |
115 g |
| Color |
light gray |
| Height |
65 mm |
| Height |
2.56 in |
| Width |
50 mm |
| Width |
1.969 in |
| Depth |
97 mm |
| Depth |
3.819 in |
| Strip length from |
5 mm |
| Strip length to |
6 mm |
| Strip length |
0.22 in |
|
|
