| Wago Fieldbus Coupler - LONWORKS® 78 kbps |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-319 |
 |
cULus,
cULus-EX,
KEMA |
| LON® FIELDBUS COUPLER 78 kbps CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
This buscoupler allows connection of the WAGO-I/O-SYSTEM to the LON® fieldbus using FTT (Free Topologie Transceiver).
The buscoupler automatically configures, creating a local process image which may include analog, digital or specialty modules. Analog and specialty module data is sent via words and bytes, digital data is sent bit by bit.
The following LNS compliant Plug-ins are available:
• WAGO TOPLON®-PRIO (Programmable Remote I/O) is the interface between the I/Os of the fieldbus coupler and the LON® network.
- Processing of up to 248 digital or 124 analog inputs /outputs
- To each network variable any SNVT can be assigned
- A maximum of 52 network variables, types available NVI /NVOs: 0/52; 20/32; 26/26; 32/20; 52/0)
• WAGO TOPLON®-IF (Installation Functions) with ready-to-use applications in any combination. For example; for stairwell light control, ambient light control, touch control dimmer, and window blind control.
- Processing of up to 48 digital inputs /outputs
- 48 network variables of the SNVT_switch type are available.
LON® and LONWORKS® are registered trademarks of Echelon Corporation. |
|
| Technical Information |
| Characteristic |
Value |
| No. of nodes |
64 without repeater127 with repeater |
| Transmission medium |
Twisted pair - FTT |
| Max. length of fieldbus segment |
500 m (Free topology) 2700 m (Bus-topology) |
| Topology |
acc. LON - specification |
| Data transmission rate (kbps) |
78 kbps |
| Buscoupler connection |
2 pole male connector, series 231 (MCS) female connector (231-302) is included |
| UL 508 |
E175199, UL 508 |
| Conformity marking |
CE |
| Max. no. of I/O modules |
62 |
| Digital signals |
max. 248 (in- and output) |
| Analog signals |
max. 124 (in- and output) |
| Configuration |
via PC with LON-Interface |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current (max) |
500 mA |
| Efficiency of the power supply |
87% |
| Internal current consumption |
300 mA |
| Total current for the I/O modules |
1700 mA |
| Isolation |
500 V system / supply |
| Voltage via power jumper contacts (max) |
DC 24 V (-15% / + 20%) |
| Current via power jumper contacts (max) |
DC 10 A |
|
| Characteristic |
Value |
| Transceiver |
FTT 10 A |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
per EN 50081-1 (93) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Weight |
200 g |
| Color |
light gray |
| Height |
65 mm |
| Height |
2.56 in |
| Width |
51 mm |
| Width |
2.008 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
