| Wago Fieldbus Coupler - CANopen ECO MCS 10 Kbaud...1 Mbaud |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-347 |
 |
cULus,
cULus-EX,
KEMA |
| CANopen ECO FIELDBUS COUPLER MSS 10 kBaud - 1 MBaud CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
The ECO fieldbus coupler is designed for applications with a reduced scale I/O requirement. Using digital only process data or small amounts of analogs, while retaining all of the choice that’s offered by the Series 750 I/O.
The coupler has an integrated supply terminal for the system voltage. The field power jumper contacts are supplied via a separate supply module. The CANopen bus coupler is capable of supporting all I/O modules and automatically configures, creating a local process image.
The local process image is devided into two data zones containing the data received and the data to be sent. The process data can be sent via the CANopen fieldbus to the PLC, PC or NC for further processing, and received from the field via CANopen.
The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the buscoupler. The bits of the digital modules are sent byte by byte and also mapped in the PDOs. If the amount of digital information exceeds 8 bits, the buscoupler automatically starts with a new byte.
All entries of the object dictionary can be mapped - as the user likes - in the 5 Rx PDOs and 5 Tx PDOs.
The complete input and output process image can be transmitted using SDOs. "Spacer modules" can be set via software.
Note: EDS files required |
|
| Technical Information |
| Characteristic |
Value |
| Max. no. of nodes |
110 |
| Transmission medium |
Shielded Cu-cable 3 x 0.25 mm² |
| Max. length of bus line |
30 M ... 1000 M (DEPENDS ON THE BAUD RATE / ON THE CABLE) |
| Baud rate |
10 kBaud ... 1 MBaud |
| Buscoupler connection |
5 pole male connector, series 231 (MCS) female connector 231-305/ 010-000 is included |
| UL 508 |
E175199, UL 508 |
| Conformity marking |
CE |
| Max. no. of I/O modules |
64 |
| Max. fieldbus input image (Byte) |
32 Byte |
| Max. fieldbus output image (Byte) |
32 Byte |
| No. of PDOs |
5 Tx / 5 Rx |
| No. of SDOs |
1 SERVER SDO |
| Communication profile |
DS-301 V4.0 |
| Device profile |
DS-401 V2.0, PROGRAMMABLE ERROR RESPONSE |
| COB ID Distribution |
SDO, Standard |
| Node ID Distribution |
DIP Switch |
| Other CANopen features |
NMT SlaveMinimum Boot-upVariables PDO MappingEmergency Message Life Guarding |
| Configuration |
via PC or PLC |
| Voltage supply |
DC 24 V (-15% / + 20%) |
| Input current typ. at rated load (24 V) |
260 mA |
| Efficiency of the power supply |
80% |
|
| Characteristic |
Value |
| Internal current consumption |
350 mA |
| Total current for the I/O modules |
650 mA |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
acc. EN 50081-2 (94) |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
1.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Weight |
115 g |
| Color |
light gray |
| Height |
65 mm |
| Height |
2.56 in |
| Width |
50 mm |
| Width |
1.969 in |
| Depth |
97 mm |
| Depth |
3.819 in |
| Strip length from |
5 mm |
| Strip length to |
6 mm |
| Strip length |
0.22 in |
|
|
