| Wago Main Page |
| I/O Products |
|
| Fieldbus Coupler |
| Programmable Feildbus Controller |
| Digital Input Modules |
| Digital Output Modules |
 |
| 1 Channel |
| 230V AC, 16A, relay 1a |
| 2 Channel |
| 24V DC,
0.5A |
| 24V DC, 2.0A |
| 24V DC,
0.5A, diagnostics |
| 24V DC,
2.0A, diagnostics |
| 24V DC,
EEx i |
| 125V AC,
0.5A, relay 2 CO contacts, pot. free |
| 230V AC,
1.0A relay 2 CO contacts, pot. free |
| 230V AC,
0.3A, solid state relay |
| 230V AC,
3.0A, solid state relay for 30s |
| 230V AC,
2.0A, relay 2 NO |
| 230V AC,
2.0A, relay 2 NO, pot. free |
| 4 Channel |
| 5V DC, 20
mA |
| 24V DC,
0.5A |
| 24V DC,
0.5A, 2-conductor |
| 24V DC,
0.5A, low-side switching |
| 8 Channel |
| 24V DC,
0.5A |
|
|
| Analog Input Modules |
| Analog Output Modules |
| Specialty Modules |
| System Modules |
| Approvals |
|
| Wago Digital Output Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-517 |
 |
cULus,
ABS, BV, DNV,
GL, LR, RINA,
KEMA |
| 2-CHANNEL RELAY OUTPUT MODULE AC 230 V, DC 300 V CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
| The connected load is switched via the digital output (relay contact) from the control system. The internal system voltage is used to trigger the relay. The SPDT contacts are electrically isolated. The switched status of the relay is shown by a LED. |
|
| Technical Information |
| Characteristic |
Value |
| Number of outputs |
2 CHANGEOVER CONTACTS (SPDT) |
| Current consumption max (internal) |
90 mA |
| Switching voltage |
AC 250 V / DC 300 V |
| Switching current (max) |
AC 1A DC 1 A at 40 V DC 1.5 A at DC 300 V |
| Switching current (min) |
100 mA (12 V DC) |
| Max. switching frequency |
6 / MIN (AT NOMINAL LOAD) |
| Pull-in time max. |
8 ms |
| Drop-out time max. |
4 ms |
| Contact material |
SILVER ALLOY |
| Printer connection |
AgSnO2 gold-plated |
| Mechanical life |
5 x 10^6 SWITCHING OPERATIONS |
| Electrical life |
1 x 10^6 SWITCHING OPERATIONS (AC 1 A/250 V) |
| Isolation |
1.5 kV EFF. (FIELD/SYSTEM), 2.5 kV RATED SURGE VOLTAGE; OVERVOLTAGE CATEGORY III |
| Internal data width (Bit) |
2 Bit |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
|
| Characteristic |
Value |
| EMC emission of interference |
per EN 50081-1 (93) |
| UL 508 |
E175199, UL 508 |
| EMC marine applications - noise proof |
gem. Germanischer Lloyd (1997) |
| KEMA |
01ATEX1024X Eex nA II T4 |
| EMC marine applications - noise transmission |
gem. Germanischer Lloyd (1997) |
| Conformity marking |
CE |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
230 V |
| Current rating CSA |
1:00 AM |
| Weight |
52.5 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
12 mm |
| Width |
0.472 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
|
