| Wago Main Page |
| I/O Products |
|
| Fieldbus Coupler |
| Programmable Feildbus Controller |
| Digital Input Modules |
| Digital Output Modules |
 |
| 1 Channel |
| 230V AC, 16A, relay 1a |
| 2 Channel |
| 24V DC,
0.5A |
| 24V DC, 2.0A |
| 24V DC,
0.5A, diagnostics |
| 24V DC,
2.0A, diagnostics |
| 24V DC,
EEx i |
| 125V AC,
0.5A, relay 2 CO contacts, pot. free |
| 230V AC,
1.0A relay 2 CO contacts, pot. free |
| 230V AC,
0.3A, solid state relay |
| 230V AC,
3.0A, solid state relay for 30s |
| 230V AC,
2.0A, relay 2 NO |
| 230V AC,
2.0A, relay 2 NO, pot. free |
| 4 Channel |
| 5V DC, 20
mA |
| 24V DC,
0.5A |
| 24V DC,
0.5A, 2-conductor |
| 24V DC,
0.5A, low-side switching |
| 8 Channel |
| 24V DC,
0.5A |
|
|
| Analog Input Modules |
| Analog Output Modules |
| Specialty Modules |
| System Modules |
| Approvals |
|
| Wago Digital Output Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-502 |
 |
cULus,
ABS, BV, DNV,
GL, LR, RINA,
cULus-EX
KEMA |
| 2-CHANNEL ANALOG OUTPUT MODULE DC 24 V POSITIVE SWITCHING SHORT-CIRCUIT PROTECTED CARRIER RAIL DIN 35 |
| The connected load is switched via the digital output from the control system. All outputs are electronically short-circuit-protected. The module is a 2-channel, 4-conductor device. Actuators with ground (earth) wire may be directly connected to the module. Each input is electrically isolated from the bus by use of optocouplers. |
|
| Technical Information |
| Characteristic |
Value |
| No. of outputs |
2 |
| CURRENT CONSUMPTION (INTERNAL) mA |
3.5 mA |
| Voltage via power jumper contacts (max) |
DC 24 V (-25% / + 30%) |
| Type of load |
resistive, inductive, lamps |
| Max. switching frequency (kHz) |
2.5 kHz |
| Output current max. (A) |
2:00 AM |
| Power consumption max. |
1.7 J |
| Short-circuit range typ. Pwm |
35 A (44 A peak) |
| Isolation |
500 V system / supply |
| Current consumption typ (field side) |
15 mA / MODULE + LOAD |
| Internal data width (Bit) |
2 Bit |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
per EN 50081-1 (93) |
| UL 508 |
E175199, UL 508 |
| EMC marine applications - noise proof |
gem. Germanischer Lloyd (1997) |
|
| Characteristic |
Value |
| UL 1604 |
E198726, UL 1604 Class 1 Dev2 ABCD T4A |
| EMC marine applications - noise transmission |
gem. Germanischer Lloyd (1997) |
| KEMA |
01ATEX1024X Eex nA II T4 |
| Conformity marking |
CE |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
24 V |
| Current rating CSA |
2:00 AM |
| Weight |
51.5 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
12 mm |
| Width |
0.472 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
|
