Wago Specialty Modules |
|
Part Number |
Conformity Marking |
Approvals |
750-651 |
|
cULus, ABS, BV, DNV, GL, LR, RINA, cULus-EX, KEMA |
Related Products (TTY) |
Baud Rate |
Parity |
Data Bits |
Stop Bits |
User Byte |
P/N |
9600 |
N |
8 |
1 |
5 bytes |
750-651/000-001 |
9600 |
E |
8 |
1 |
- |
750-651/000-002 |
1200 |
N |
8 |
1 |
- |
750-651/000-003 |
|
TTY INTERFACE 20 mA CURRENT LOOP TTY / 9600 / N / 8 / 1 CAGE CLAMP CONNECTION |
This interface allows the connection of devices which are equipped with a 20 mA current interface. The interface is working in active, semi-active or passive operation mode. The module communicates with the control unit over the fieldbus coupler. The active communication channel works independently of the higher-level fieldbus system and allows full duplex operation up to 19200 baud. The TTY interface guarantees high interference immunity because of the electrical isolation and the driven loop current. |
|
Technical Information |
Characteristic |
Value |
Transmission channel |
1 TxD / 1 RxD, full duplex |
Baud rate |
9600 Baud (8 N 1) |
Bit transfer |
2 x 20 mA |
Load impedance |
< 500 Ohm |
Line length (max) |
ca. 1000 m twisted pair |
Buffer |
128 Byte in / 16 Byte out |
CURRENT CONSUMPTION (INTERNAL) mA |
55 mA |
Voltage supply |
via system voltage DC / DC |
Isolation |
500 V system / supply |
Data size |
1 x 24 Bit in / out ( 3 Bytes user data )1 x 8 Bit Control / status |
Operating temperature |
0 °C ... + 55 °C |
Storage temperature |
-25 °C ... +85 °C |
Relative air humidity |
95% |
Vibration resistance |
acc. IEC 60068-2-6 |
Shock resistance |
acc. IEC 60068-2-27 |
Degree of protection |
IP 20 |
EMC immunity to interference |
acc. EN 50082-2 (96) |
EMC emission of interference |
per EN 50081-1 (93) |
UL 508 |
E175199, UL 508 |
EMC marine applications - noise proof |
gem. Germanischer Lloyd (1997) |
|
Characteristic |
Value |
UL 1604 |
E198726, UL 1604 Class 1 Dev2 ABCD T4A |
EMC marine applications - noise transmission |
gem. Germanischer Lloyd (1997) |
KEMA |
01ATEX1024X Eex nA II T4 |
Conformity marking |
CE |
Cross section from [mm²] |
0.08 mm² |
Cross section to [mm²] |
2.5 mm² |
Cross section from [AWG] |
28 AWG |
Cross section to [AWG] |
14 AWG |
Voltage CSA |
24 V |
Color |
light gray |
Height |
64 mm |
Height |
2.52 in |
Width |
12 mm |
Width |
0.472 in |
Depth |
100 mm |
Depth |
3.937 in |
Strip length from |
8 mm |
Strip length to |
9 mm |
Strip length |
0.33 in |
|
|