Connex-Electronics.com
Wago
Wago IO System - Specialty Modules

Wago Specialty Modules
Wago 750-630
Part Number Conformity Marking Approvals
Add part number 750-630 to your Quote. 750-630 CE cULus,
cULus-EX,
KEMA
SSI 24bit 125kHz Bin: Add part number 750-630/000-001 to your Quote. 750-630/000-001
SSI 24bit 250kHz Bin: Add part number 750-630/000-002 to your Quote. 750-630/000-002
SSI 24bit 125kHz Gray Status: Add part number 750-630/000-004 to your Quote. 750-630/000-004
SSI 15bit 125kHz Gray Status: Add part number 750-630/000-005 to your Quote. 750-630/000-005
SSI 24bit 250kHz Gray Add part number 750-630/000-006 to your Quote. 750-630/000-006
SSI 24bit 83kHz Gray Status: Add part number 750-630/000-007 to your Quote. 750-630/000-007
SSI 25bit 125kHz Gray: Add part number 750-630/000-008 to your Quote. 750-630/000-008
SSI 13bit 250kHz Bin: Add part number 750-630/000-009 to your Quote. 750-630/000-009
SSI 25bit 125kHz Bin: Add part number 750-630/000-011 to your Quote. 750-630/000-011
SSI 13bit 125kHz Gray: Add part number 750-630/000-012 to your Quote. 750-630/000-012
SSI 29bit 125kHz Bin: Add part number 750-630/000-013 to your Quote. 750-630/000-013
SSI-INTERFACE 24 Bit / 125 kHz / Gray CAGE CLAMP CONNECTION
This module is an SSI interface for the direct connection to an SSI transmitter (for encoder devices, etc.). After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it directly in the form of a data word into the process image of the PLC or PC. It is possible to factory adjust different operating modes, transfer frequencies and bit widths by means of the control register. The power supply for the transmitter is derived internally from the power jumper contacts.
Technical Information
Characteristic Value
Transmitter connection In + D, -D / Out + CI, - CI
Current consumption typ (internal) 85 mA
Voltage via power jumper contacts (max) DC 24 V (-15% / + 20%)
Transmitter supply Sampling delay (instruction / conversion)
Baud rate 125 kHz (max. 1 MHz)
serial input 32 Bit Breite
Signal output Differential signal (RS 422)
Signal input Differential signal (RS 422)
Code Graycode
Isolation 500 V system / supply
Data size 1 x 32 Bit 1 x 8 Bit Control / status (optional) (24 Bit Data, 8 Bit reserved)
Operating temperature 0 °C ... + 55 °C
Storage temperature -25 °C ... +85 °C
Relative air humidity 95%
Vibration resistance acc. IEC 60068-2-6
Shock resistance acc. IEC 60068-2-27
Characteristic Value
Degree of protection IP 20
UL 508 E175199, UL 508
UL 1604 E198726, UL 1604 Class 1 Dev2 ABCD T4A
KEMA 01ATEX1024X Eex nA II T4
Cross section from [mm²] 0.08 mm²
Cross section to [mm²] 2.5 mm²
Cross section from [AWG] 28 AWG
Cross section to [AWG] 14 AWG
Voltage CSA 24 V
Color light gray
Height 64 mm
Height 2.52 in
Width 12 mm
Width 0.472 in
Depth 100 mm
Depth 3.937 in
Strip length from 8 mm
Strip length to 9 mm
Strip length 0.33 in