| Sealcon
Straight and 90 o - Turn To Seal Fittings |
 |
 |
| SPECIFICATIONS: |
| Operating Temperature: |
Materials: |
 |
Nylon 6:
-40°F to 230°F
(-40°C
to 110°C)
Nylon 6/6:
-40°F to 212°F
(-40°C to
100°C)
Modified Polyester Elastomer:
-58°F to
266°F
(-50°C to 130°C) |
Fittings:
Nylon 6/6
Standard
Conduit:
Nylon 6
Super Flex Conduit:
Modified Polyester Elastomer |
| Important |
SM - Straight Fittings:
The fastest and most labor saving
method to connect flexible nylon conduit to a push-in fitting. The nylon
conduit is inserted into the fitting until the hook snaps over the ridge of the
corrugated tubing. The conduit can be mounted rigid for liquid tight (NEMA 4x)
or turnable for non-liquid tight (NEMA 2). |
EM - 90° Snap Elbow
Fittings:
Combines the unique 90° snap elbow and straight push-in
fitting for easy installation of wires into an elbow fitting. The
“straight” elbow is snapped together after the wires have been
installed, resulting in a liquid tight 90° elbow fitting. |
Standard Corrugated Conduit:
These are made of flame
retardant Nylon. The conduit is suitable for fixed and moderate flexing
installations. |
Super Flex Conduit:
These are made of a
special plastic blend, greatly increasing the flex-life of the conduit. It is
the perfect solution for drag chain and robotics applications, with high cycle
life expectancy, UV and impact resistant at low temperatures, tough and
abrasion resistant. Size 8 & 14 is not available in this material. |
