|
| Easy, Time Saving
Installation |
| Simply push the cable through the installed strain
relief fitting and tighten dome- or flex nut. If a snap elbow is used, push the
cable through the straightened elbow, snap 90° and then tighten the dome-
or flex nut for a liquid tight connection. No disassembly of the fitting is
required: Insert Cable - Tighten Nut - Finished! |
 |
| Applications |
| Wherever a metal strain relief fitting is used, this
Nylon Strain Relief fitting can be substituted to save you money without
sacrificing performance. Typical applications are: Control cabinets, car
washes, hot tubs, instrumentation, carpet cleaning machines, food processing
equipment, underground for direct burial, underwater to 300 ft. (150 PSIG) |
|
| Dependable |
| Exceeds NEMA 4x and 6 specifications (UL tested). For
submersed applications, use an O-Ring or Seal Ring between body and housing.
Either tap the housing or secure in panel hole with Locking Nut. |
|
| Non-Corrosive |
| The Nylon strain relief fittings are resistant to salt
water, weak acids, weak alkalis, alcohol, esters, ketones, ether, gasoline,
mineral, animal and vegetable oil. |
|
| Large Range |
| 4000 types and sizes (Straight fittings and Snap-Elbows
with dome- and flex nuts) accommodate cable diameters from 1/16” to
1-3/4”. |
|
| Rugged Construction -
(See Breakout A) |
| The rugged lead screw results in a dependable
transmission of force between nut and body. |
|
| Pull-out Resistance - Protection
- (See Breakout B) |
| Flexible, overlapping clamping splines prevent the form
seal from being pulled out of the fitting and offers protection for the
cable. |
|
| Liquid Tight -
(See Breakout C) |
| The concentric seal ridge and molded groove for an
optional O-Ring results in a liquid tight seal between body and housing. |
|
| Submersible -
(See Breakout D) |
| The patented recess and high performance seal
guarantees NEMA 4x and 6 (IP 68) at 150 PSIG (10 BAR). |
|
| Snap Elbow |
Flex Nut |
 |
This Snap Elbow saves space
and time when installing, because the cable can be inserted into the open elbow
then snapped closed, after the cable has been properly positioned. Quick &
Easy! |
|
 |
Kinking and chafing of the
cable is eliminated with use of the Flex Nut. |
|
|
|
| Approvals / Material |
 |
