| Wago Digital Input Modules |
 |
| Part Number |
Conformity Marking |
Approvals |
 750-427 |
 |
cULus,
cULus-EX,
KEMA |
| 2-CHANNEL DIGITAL INPUT MODULE DC 110 V CARRIER RAIL DIN 35 CAGE CLAMP CONNECTION |
| The digital input module receives control signals from digital field devices (sensors, etc.). The module is a 2-channel device. Each channel can function as a low-side switch or high-side switch input. The type of input depends on the external wiring. An optocoupler is used for eletrical isolation between the bus and the field side. Attention: An additional supply module
750-612 must be added for operation with DC 110 V! |
|
| Technical Information |
| Characteristic |
Value |
| No. of inputs |
2 |
| CURRENT CONSUMPTION (INTERNAL) mA |
2.5 mA |
| Nominal input voltage DC |
110 V |
| Signal voltage (0) |
< 50 V |
| Signal voltage (1) |
> 70 V |
| Input/output current typ. |
2.5 mA |
| Current supply (typ) |
3.5 mA |
| Voltage supply |
via system voltage DC / DC |
| Isolation |
500 V system / supply |
| Internal data width (Bit) |
2 Bit |
| Operating temperature |
0 °C ... + 55 °C |
| Storage temperature |
-25 °C ... +85 °C |
| Relative air humidity |
95% |
| Vibration resistance |
acc. IEC 60068-2-6 |
| Shock resistance |
acc. IEC 60068-2-27 |
| Degree of protection |
IP 20 |
| EMC immunity to interference |
acc. EN 50082-2 (96) |
| EMC emission of interference |
per EN 50081-1 (93) |
|
| Characteristic |
Value |
| UL 508 |
E175199, UL 508 |
| KEMA |
01ATEX1024X Eex nA II T4 |
| Conformity marking |
CE |
| Cross section from [mm²] |
0.08 mm² |
| Cross section to [mm²] |
2.5 mm² |
| Cross section from [AWG] |
28 AWG |
| Cross section to [AWG] |
14 AWG |
| Voltage CSA |
48 V |
| Weight |
37.513 g |
| Color |
light gray |
| Height |
64 mm |
| Height |
2.52 in |
| Width |
12 mm |
| Width |
0.472 in |
| Depth |
100 mm |
| Depth |
3.937 in |
| Strip length from |
8 mm |
| Strip length to |
9 mm |
| Strip length |
0.33 in |
|
|
