| Wago Analog Output Modules |
 | | Part Number | Conformity Marking | Approvals |
 750-559 |  | cULus, | | 4-CHANNEL ANALOG OUTPUT MODULE 0-10 V CAGE CLAMP CONNECTION | | The analog output module creates a standardized signal of 0-10V. The output signal is electrically isolated and will be transmitted with a resolution of 12 bits. The fieldside voltage supply is used for the power supply of the module. The ouput channels of the module have one common potential. | |
| Technical Information | | Characteristic | Value | | No. of outputs | 4 | | Current consumption max (internal) | 125 mA | | Signal voltage | 0 - 10 V | | Load impedance | > 5 kOhm | | Resolution (Bit) | 12 Bit | | Measuring error (25°) | < +/- 0.1 % of the full scale value | | Temperature coefficient | < +/- 0.01 % / K of the full scale value | | Conversion time (typ) | 10 ms | | Transient type | 100 ms | | UL 508 | E175199, UL 508 (applied for) | | UL 1604 | E198726, UL 1604 (filed) | | Conformity marking | CE | | Voltage supply | via system voltage DC / DC | | Isolation | 500 V system / supply | | Data size | 4 x 16 Bit data ;4 x 8 Bit controller / status (optional) | | Operating temperature | 0 °C ... + 55 °C | | Storage temperature | -25 °C ... +85 °C | | Relative air humidity | 95% | | | Characteristic | Value | | Vibration resistance | acc. IEC 60068-2-6 | | Shock resistance | acc. IEC 60068-2-27 | | Degree of protection | IP 20 | | EMC immunity to interference | acc. EN 50082-2 (96) | | EMC emission of interference | per EN 50081-1 (93) | | Cross section from [mm²] | 0.08 mm² | | Cross section to [mm²] | 2.5 mm² | | Cross section from [AWG] | 28 AWG | | Cross section to [AWG] | 14 AWG | | Weight | 53.5 g | | Color | light gray | | Height | 64 mm | | Height | 2.52 in | | Width | 12 mm | | Width | 0.472 in | | Depth | 100 mm | | Depth | 3.937 in | | Strip length from | 8 mm | | Strip length to | 9 mm | | Strip length | 0.33 in | | |
