Finder MasterINTERFACE 39 Series Relay Interface Modules

Slim timed interface module, 6.2 mm wide, ideal for space-saving timing solutions in panels
Timer adjustment via top mounted rotary knob, accessible after assembly
Start terminal
DIP-switch for selection of 4 time scales and 8 functions
Accepts output fuse module 093.63 (for 5 x 20 mm fuses) for quick and easy load protection
Common connection possible with optional jumper links (terminals A1, A2 and 15+)
0.1 or 2 A solid state relay
12 - 24 V AC/DC supply
35 mm rail (EN 60715) mounting

	Download Complete Specifications

Part Number	Coil Voltage	Output Version	Notes
39.80.0.012.7048	12 V AC/DC	0.1A - 48VDC	Special Quote Only
39.80.0.012.8240	12 V AC/DC	2A - 230VAC	Special Quote Only
39.80.0.012.9024	12 V AC/DC	2A - 24V DC	Best Availability
39.80.0.024.7048	24 V AC/DC	0.1A - 48VDC	Special Quote Only
39.80.0.024.8240	24 V AC/DC	2A - 230VAC	Special Quote Only
39.80.0.024.9024	24 V AC/DC	2A - 24V DC	Best Availability

Wiring Diagram	Timing Diagram	Timing Function Description
		(AI) ON-delay. Apply power to timer. Output contacts transfer after preset time has elapsed. Reset occurs when power is removed.
		(DI) Interval. Apply power to timer. Output contacts transfer immediately. After the preset time has elapsed, contacts reset.
		(GI) Pulse delayed. Apply power to timer. Output contacts transfer after preset time has elapsed. Reset occurs after a fixed time of 0.5s.
		(SW) Symmetrical flasher (starting pulse on). Apply power to timer. Output contacts transfer immediately and cycle between ON and OFF for as long as power is applied. The ratio is 1:1 (time on = time off).
		(BE) OFF-delay with control signal. Power is permenently applied to the timer. The output contacts transfer immediately on closure of the Signal Switch (S). Opening the Signal Switch initiates the preset delay, after which time the output contacts reset.
		(CE) ON- and OFF-delay with control signal. Power is permenently applied to the timer. Closing the Signal Switch (S) initiates the preset delay, after which time the output contacts transfer. Opening the Signal switch initiates the same preset delay, after which time the output contacts reset.
		(DE) Interval with control signal on. Power is permenently applied to the timer. On momentary or maintained closure of Signal Switch (S), the output contacts transfer, and remain so for the duration of the preset delay, after which they reset.
		(EE) Interval with control signal off. Power is permenently applied to the timer. On opening of the Signal Switch (S) the output contacts transfer, and remain so for the duration of the preset delay, after which they reset.

Contact specification	39.80.x.xxx.9024	39.80.x.xxx.7048	39.80.x.xxx.8240
Contact configuration	1 NO (SPST-NO)
Rated current/Maximum peak current (10ms) A	2/20 DC	0.1/0.5 DC	2/40 AC
Rated voltage/Maximum blocking voltage V	24/33 DC	48/60 DC	240/275 AC
Switching voltage range V	(1.5...24) DC	(1.5...48) DC	(12...240) AC
Minimum switching current mA	1	0.05	22
Max. "OFF-state" leakage current mA	0.001	0.001	1.5
Max. "ON-state" voltage drop V	0.12	1	1.6
Supply specification	39.80.x.xxx.9024	39.80.x.xxx.7048	39.80.x.xxx.8240
Nominal voltage (U_N ) V AC/DC	12 - 24
Operating range	(0.8...1.1)U_N
Holding voltage	0.6 U_N
Must drop-out voltage	0.1 U_N
Technical data	39.80.x.xxx.9024	39.80.x.xxx.7048	39.80.x.xxx.8240
Specified time range	(0.1...3)s, (3...60)s, (1...20)min, (0.3...6)h
Repeatability %	±1
Recovery time ms	< or = 50
Minimum control impulse ms	50
Setting accuracy - full range %	5
Ambient temperature range °C	–20…+50
Protection category	IP 20