|
|
 |
| Power-Sonic Model PSG-480 Sealed Lead-Acid Battery
|
Order Part Number:
PSG-480
| General
Specifications |
| Dimensions: |
| Length |
3.54 inches |
90 millimeters |
| Width |
1.94 inches |
49 millimeters |
| Height |
4.00 inches |
102 millimeters |
| Height over Terminals |
4.00 inches |
102 millimeters |
| Approximate Weight |
2.50 pounds |
1.10 kilograms |
| Terminals: |
Quick Disconnect Tabs
(0.250" x 0.032") |
| Case: |
ABS Plastic |
| Electrical
Specifications |
| Nominal Voltage: |
4 Volts (2 cell in series)
|
| Nominal Capacity:
|
| 20 hour rate |
(400mA to 3.50 volts) |
8.0 AH |
| 10 hour rate |
(700mA to 3.50 volts) |
7.0 AH |
| 5 hour rate |
(1300mA to 3.20 volts) |
6.5 AH |
| 1 hour rate |
(4800mA to 3.00 volts) |
4.8 AH |
| Energy Density (20 hour rate)
|
1.16 Watt-hours/cubic inch |
71.0 Watt-hours/l |
| Specific Energy (20 hour rate)
|
12.8 Watt-hours/pound |
29.0 Watt-hours/kg |
| Internal Resistance (Fully Charged
Battery) |
7.9 milliohms (approx.)
|
| |
Charging :
Cycle Applications: Limit initial current to 1600mA. Charge until battery
voltage (under charge) reaches 4.80 to 5.00 volts at 68' F (20' C). Hold at
4.80 to 5.00 volts until current drops to approximately 80mA. Battery is fully
charged under these conditions, and charger should either be disconnected or
switched to "float" voltage. "Float" or "Stand-by Service": Hold battery
across constant voltage source of 4.50 to 4.60 volts continuously. When held at
this voltage, the battery will seek its own current level and maintain itself
in a fully charged condition.
|
