Connex-Electronics.com
Power-Sonic
Power-Sonic Model PS-650L Sealed Lead-Acid Battery
 
PS650L
 

Order Part Number: Add This Part to your Quote. PS-650L

General Specifications
Dimensions:
Length 2.63 inches 67 millimeters
Width 2.63 inches 67 millimeters
Height 3.78 inches 96 millimeters
Height over Terminals 4.28 inches 109 millimeters
Approximate Weight 2.00 pounds 0.90 kilograms
Terminals: "L" Fully collapsible (to 1mm) Spring Terminals (S)
"LF" Quick disconnect tabs (0.187" x 0.032")
Case: High-impact polystyrene
Electrical Specifications
Nominal Voltage: 6 Volts (3 cell in series)
Nominal Capacity:
20 hour rate (250mA to 5.25 volts) 5.0 AH
10 hour rate (400mA to 5.25 volts) 4.0 AH
5 hour rate (600mA to 5.10 volts) 3.0 AH
1 hour rate (2100mA to 4.50 volts) 2.1 AH
Energy Density (20 hour rate) 1.15 Watt-hours/cubic inch 69.6 Watt-hours/l
Specific Energy (20 hour rate) 15.0 Watt-hours/pound 33.3 Watt-hours/kg
Internal Resistance (Fully Charged Battery) 80 milliohms (approx.)
 
Charging :

Cycle Applications: Limit initial current to 1000mA. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68º F (20º C). Hold at 7.20 to 7.35 volts until current drops to approximately 50mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage.

"Float" or "Stand-by Service": Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.