|
|
 |
| Power-Sonic Model PS-605 Sealed Lead-Acid Battery
|
Order Part Number:
PS-605
| General
Specifications |
| Dimensions: |
| Length |
2.24 inches |
57 millimeters |
| Width |
0.55 inches |
14 millimeters |
| Height |
1.97 inches |
50 millimeters |
| Height over Terminals |
1.97 inches |
50 millimeters |
| Approximate Weight |
0.20 pounds |
0.09 kilograms |
| Terminals: |
Wire Leads - Molex housing
5264-02 & 5263-PBT plug |
| Case: |
ABS Plastic |
| Electrical
Specifications |
| Nominal Voltage: |
6 Volts (3 cell in series)
|
| Nominal Capacity:
|
| 20 hour rate |
(25mA to 5.25 volts) |
0.50 AH |
| 10 hour rate |
(45mA to 5.25 volts) |
0.45 AH |
| 5 hour rate |
(80mA to 5.10 volts) |
0.40 AH |
| 1 hour rate |
(300mA to 4.50 volts) |
0.30 AH |
| Energy Density (20 hour rate)
|
1.24 Watt-hours/cubic inch |
75.2 Watt-hours/l |
| Specific Energy (20 hour rate)
|
15.0 Watt-hours/pound |
33.3 Watt-hours/kg |
| Internal Resistance (Fully Charged
Battery) |
360 milliohms (approx.)
|
| |
Charging :
Cycle Applications: Limit initial current to 100mA. Charge until battery
voltage (under charge) reaches 7.20 to 7.35 volts at 68º F (20º C).
Hold at 7.20 to 7.35 volts until current drops to approximately 5mA. Battery is
fully charged under these conditions, and charger should either be disconnected
or switched to "float" voltage. "Float" or "Stand-by Service": Hold battery
across constant voltage source of 6.75 to 6.90 volts continuously. When held at
this voltage, the battery will seek its own current level and maintain itself
in a fully charged condition.
|
