|
|
 |
| Power-Sonic Model PS-12550 Sealed Lead-Acid Battery
|
Order Part Number:
PS-12550
| General
Specifications |
| Dimensions: |
| Length |
9.04 inches |
230 millimeters |
| Width |
5.45 inches |
138 millimeters |
| Height |
8.15 inches |
207 millimeters |
| Height over Terminals |
8.98 inches |
228 millimeters |
| Approximate Weight |
41.10 pounds |
18.70 kilograms |
| Terminals: |
NB, U, AP, M, B |
| Case: |
Polypropylene |
| Electrical
Specifications |
| Nominal Voltage: |
12 Volts (6 cell in series)
|
| Nominal Capacity:
|
| 20 hour rate |
(2.75A to 10.50 volts) |
55.0 AH |
| 10 hour rate |
(4.90A to 10.50 volts) |
49.0 AH |
| 5 hour rate |
(8.80A to 10.20 volts) |
44.0 AH |
| 1 hour rate |
(33A to 9.00 volts) |
33.0 AH |
| Energy Density (20 hour rate)
|
1.66 Watt-hours/cubic inch |
101.4 Watt-hours/l |
| Specific Energy (20 hour rate)
|
16.1 Watt-hours/pound |
35.4 Watt-hours/kg |
| Internal Resistance (Fully Charged
Battery) |
10.2 milliohms (approx.)
|
| |
Charging :
Cycle Applications: Limit initial current to 11A. Charge until battery voltage
(under charge) reaches 14.40 to 14.70 volts at 68º F (20º C). Hold at
14.40 to 14.70 volts until current drops to approximately 550mA. Battery is
fully charged under these conditions, and charger should either be disconnected
or switched to "float" voltage. "Float" or "Stand-by Service": Hold battery
across constant voltage source of 13.50 to 13.80 volts continuously. When held
at this voltage, the battery will seek its own current level and maintain
itself in a fully charged condition.
|
