|
|
 |
| Power-Sonic Model PS-12400 Sealed Lead-Acid Battery
|
Order Part Number:
PS-12400
| General
Specifications |
| Dimensions: |
| Length |
7.75 inches |
197 millimeters |
| Width |
6.50 inches |
165 millimeters |
| Height |
6.75 inches |
172 millimeters |
| Height over Terminals |
6.75 inches |
172 millimeters |
| Approximate Weight |
30.50 pounds |
13.80 kilograms |
| Terminals: |
M6 nut & bolt connector
|
| Case: |
ABS Plastic |
| Electrical
Specifications |
| Nominal Voltage: |
12 Volts (6 cell in series)
|
| Nominal Capacity:
|
| 20 hour rate |
(2000mA to 10.50 volts) |
40.0 AH |
| 10 hour rate |
(3700mA to 10.50 volts) |
37.0 AH |
| 5 hour rate |
(6600mA to 10.20 volts) |
33.0 AH |
| 1 hour rate |
(24A to 9.00 volts) |
24.0 AH |
| Energy Density (20 hour rate)
|
1.42 Watt-hours/cubic inch |
86.9 Watt-hours/l |
| Specific Energy (20 hour rate)
|
15.7 Watt-hours/pound |
34.8 Watt-hours/kg |
| Internal Resistance (Fully Charged
Battery) |
16 milliohms (approx.)
|
| |
Charging :
Cycle Applications: Limit initial current to 8000mA. Charge until battery
voltage (under charge) reaches 14.40 to 14.70 volts at 68º F (20º C).
Hold at 14.40 to 14.70 volts until current drops to approximately 400mA.
Battery is fully charged under these conditions, and charger should either be
disconnected or switched to "float" voltage. "Float" or "Stand-by Service":
Hold battery across constant voltage source of 13.50 to 13.80 volts
continuously. When held at this voltage, the battery will seek its own current
level and maintain itself in a fully charged condition.
|
