|
|
 |
| Power-Sonic Model PS-1229 Sealed Lead-Acid Battery
|
Order Part Number:
PS-1229
| General
Specifications |
| Dimensions: |
| Length |
7.01 inches |
178 millimeters |
| Width |
1.34 inches |
34 millimeters |
| Height |
2.36 inches |
60 millimeters |
| Height over Terminals |
2.60 inches |
66 millimeters |
| Approximate Weight |
2.10 pounds |
0.96 kilograms |
| Terminals: |
Quick disconnect tabs
(0.187" x 0.032") |
| Case: |
ABS Plastic |
| Electrical
Specifications |
| Nominal Voltage: |
12 Volts (6 cell in series)
|
| Nominal Capacity:
|
| 20 hour rate |
(145mA to 10.50 volts) |
2.90 AH |
| 10 hour rate |
(260mA to 10.50 volts) |
2.60 AH |
| 5 hour rate |
(450mA to 10.20 volts) |
2.25 AH |
| 1 hour rate |
(1750mA to 9.00 volts) |
1.75 AH |
| Energy Density (20 hour rate)
|
1.57 Watt-hours/cubic inch |
95.8 Watt-hours/l |
| Specific Energy (20 hour rate)
|
16.6 Watt-hours/pound |
36.3 Watt-hours/kg |
| Internal Resistance (Fully Charged
Battery) |
35 milliohms (approx.)
|
| |
Charging :
Cycle Applications: Limit initial current to 580mA. Charge until battery
voltage (under charge) reaches 14.40 to 14.70 volts at 68º F (20º C).
Hold at 14.40 to 14.70 volts until current drops to approximately 29mA. Battery
is fully charged under these conditions, and charger should either be
disconnected or switched to "float" voltage. "Float" or "Stand-by Service":
Hold battery across constant voltage source of 13.50 to 13.80 volts
continuously. When held at this voltage, the battery will seek its own current
level and maintain itself in a fully charged condition.
|
